All Equipment is Brand New and Unused
Complete List of Equipment below and attached photos. 
Location: Texas, USA

Original Wholesale Listed Price: USD $ 33'650'000.- 

Our Price Offer: USD $ 18'650'000.- 

DISCOUNT: USD $ 15'000'000.- ! ! ! 

NB: Please Note: This lot of Honghua Drilling Rigs has not been used and is no longer required for the company's operations and are being sold to recover funds. 
 
Manufacturer: Honghua 

DESCRIPTION 
 
Model of drilling rig: HH- ZJ40DBS Helicopter transportable rig with 3000 Kg
loads, drilling depth capacity 12000 ft (4.000 m) 
 
MAST 
 
Model: JJ320/45-KH 
 
Effective height of mast: 146 ft (44,5 m) 
 
Static hook load capacity: 716.800 lbs. (3.200 kN) 
 
CROWN BLOCK 
 
Model TC320, manufactured by Honghua 
 
Max. Load: 716.800 Lbs. (3.200kN) 
 
No. of pulleys: 6 with perforating cable of 1.1/4” (5x50” and 1x60”) 
 
MONKEY BOARD 
 
Able to work with DP 5” Range II, with Fall Protection Safety Harness System, Escape
Line (Geronimo) and Ingersoll Rand Man Rider winch. 
 
SUBSTRUCTURE 
 
Max. Capacity of Rotary Table beam: (320 ton) 
 
Setback load (Range II, 5” drill pipe): (3200 kN) 
 
Height of drill floor: 7,5 m (25 ft) 
 
Prepared to receive Walker System removable by 
 
Pins, moveable in two axis “X” and “Y”. 

ROTARY TABLE 
 
Pin Drive type, manufactured by Honghua, with opening diameter of 27-1/2" (698.5 mm),
maximum rotary speed of 220 RPM and maximum static load of 1.000.000 lbs. (4500 kN). 
 
DRAW-WORKS 
 
Disc Brake type actuated by 2 electric motors with minimum 870 HP each and Bit
Feeder system (with proximity switch for the crown Block and Rotary Table). 
 
Emergency Shutdown installed in the Doghouse. 640 m (2,100 ft) Drill Line 32 mm (1-1/4”)
6×19S IWRC EIPS/RRL. 
 
Cat Head Model YM-16, manufactured by Honghua. 
 
TRAVELLING BLOCK 
 
Model YC315, manufactured by Honghua, with 6 Sheaves and maximum static load
capacity of (3500kN) (790,000 lb.). 
 
HOOK 
 
Model DG315, manufactured by Honghua, built to specification API Spec 8C,
with maximum static load capacity of 790,000 lb. (3.500 kN) 
 
RIG FLOOR TOOLS 
 
Inside BOP’s 3 ½IF – 4 ½IF, DP Elevator 3 ½” – 5”, pneumatic pipe spinner casing,
manual slips. DP. 3 ½” – 5”, automatic DP. Slips, Casing: Spiders, side door, elevators,
aux. elevators, slips, HFD. C56. Tong DP. Mud saver. 
 
GENSETS 
 
8 sets of Caterpillar Generator Model C-15 ATAAC, 455kW/ 60Hz / 480V, with soundproof
enclosures. 
 
AUXILIAR GENERATORS 
 
2 sets of Cooltech Generator Model KJ200E, rated 200 KVA (160 KW). 
 
SWÍVEL 
 
Model SL450, manufactured by Hong Hua, with maximum static load of 1,000,000
lbs. (4500 kN), maximum dynamic load (API Bearing Load) of 630,000 lbs. (2800 kN)
and maximum rotary speed of 300 RPM. 

KELLY SPINNER 
 
Model A6C-2 made by International, with maximum torque of 1,800 ft. Pounds and
maximum speed 150 RPM. 
 
IRON ROUGHNECK 
 
Model ST80C, manufactured by National Oilwell Varco (NOV) with Tubular OD Range of 41/4"
to 8-1/2" (108-216mm) and Drill Pipe range of 3-1/2" to 5-1/2" (89-140mm).
 
TONGS 
 
− Drill Pipe Tongs Type C, Model 060-273/48, with jaws from 2-7/8" to 5".

− Drill Pipe Tongs type DB, Model Q89-423/90, with jaws from 5" to 9-1/2". 
 
−Casing Tongs type B, Model Q86-324/75 (from 3-3/8" to 12-3/4") and Model Q340-915/35
(from 13-3/8" to 20') 
 
−Hydraulic Drill Pipe Power Tong made by ECKEL model 8-5/8 Hydra-Shift HT (with
Hydraulic Backup) 
 
BLOWOUT PREVENTERS 
 
Three set of 13-5/8" 5,000 psi Type U, Single Ram BOP, Cameron style, with Pipe Rams
2-3/8", 2-7/8", 3-1/2", 5", 7", and 9-5/8". One set of 13-5/8" 5,000 psi Annular BOP, Shaffer
style, with lower clamp connection, manufactured by Rongsheng. 
 
BOP ACCUMULATOR 
 
Model FKQ960-8, with 3000Psi (21Mpa) Working Pressure, 17 bottles with a total of 969
l capacity and Remote Panel on Rig Floor. 
 
CHOKE MANIFOLD 
 
Choke manifold 3-1/8” x 5,000 psi with two manual adjustable chokes Cameron 3-1/8” x
5,000 psi and hydraulic choke Cameron 3-1/8” x 5,000 psi, manufactured by King Dream. 
 
MUD PUMPS 
 
Qty: 3 sets Heli-transportation Type: Triplex single-acting piston type. Max. diameter of 
 
liner x stroke: 6.1/2” x 9” Max. strokes: 150 spm Rated Power: 596 KW (800 HP)
Max.working pressure: 34,5MPa (5000 PSI) 
 
SHALE SHAKER 
 
Qty: 3 sets, 

Model: Miswaco Meerkat PT Dual Motion Balanced Elliptical Motion Basic Fluid Capacity: 
 
500 gpm (1.893 L/min) G-force linear motion up to 6,9 G’s G-force elliptical
motion reduces (5,7G’s maximum) 
 
MUD CLEANER 
 
Model: Miswaco 212/6T4 Meerkat Pt. Desander hydrocyclones: 2 x 10”. Desilter
hydrocyclones: 16 x 4” 
 
DEGASSER 
 
M-I SWACO Compact D-Gasser, capable of removing entrained gas (including H2S and
corrosive oxygen) from drilling fluid, equipped with Mission Magnum Degasser Feed
Pump Model 8x6x14. Vertical Degasser with Working Pressure of 102 psi (0.7MPa) and
diameter of fluid inlet pipe 102 mm 
 
DECANTER CENTRIFUGE 
 
M-I SWACO Decanting Centrifuge Model 518, stainless steel rotating assembly, equipped
with M-I SWACO Type II Progressive Cavity Centrifuge Feed Pump with rated capacity of
22 gallons/100 revolutions@0 psi (82 liters/100 revolutions) 
 
MUD TANKS 
 
13 sets, each made of steel with cover. Total volume 190 m3 (1,200 bbl.), equipped
with single compartment Sand Trap tank, 50 bbls Slug Pit and 50 bbls Trip Tank. 
 
CARGO HANDLING SYSTEM 
 
Two MAEDA model LC1385-8B 6,000 kg capacity rating Telescoping Crawler Crane with
Blade Attachment and Quick Disconnect and Two Tadano Mantis 3612, 16,000 kg
capacity Telescopic Crawler Crane. 
 
DRILLING INSTRUMENTATION 
 
− SIEMENS Mud Pits volume sensors 
 
−M/D TOTCO Drilling instr.: WOB Indicator, Connection 
 
Torque Indicator, Tongs Torque Gauge, Mud Pump indicators, Bit Tracking System, TonMile
register,
etc.

 
−Honghua Digital Drilling Recorder 
 
−NOV Deviation Survey Double Recorder 
 
−HONEYWELL Gas detection system 

 
MISCELLANEOUS 
 
−Diesel fuel reserve of 30 m3 (190 bbl.). −Water treatment System for
filtering, purification, chlorination and pH control for daily water
consumption for the camps. 
 
2 Drilling Rigs 
 
Condition: The equipment was purchased 5 years ago but has never been used. 
 
• It was manufactured in China -> shipped to Brazil -> and eventually
shipped to Houston. 

• It has never been turned on, used or tested. 

• These two rigs were part of a set of four. 
 
Rigs 3 and 4 have already been sold. They were tested and worked
perfectly. 
 
Rigs 1 and 2 WILL be tested before release. 
 
• Each unit comes with 8 CAT generators.

Any further information required, please do not hesitate in contacting us.